What to Do After Changing the Battery in My Nissan Smart Key Fob to Get It to Work Again

Our editors choice the products & services we write nigh. When you buy through our links, nosotros may get a commission. Learn more than.

Well-nigh of us like convenience, and keyless automobile fobs are probably ane of the ultimate. You literally don't have to do anything except approach your vehicle, and the door will unlock. How great is that?

Of course, modern conveniences sometimes fail, and key fobs are no exception. The almost common crusade of failure is a flat battery . Merely what can you do when you've inverse the bombardment and your Nissan key trick is still non working?

This article gives you seven tips to go your keyless key fob working after changing the battery. The tips may even help y'all if you have cleaved downwardly abroad from abode, fugitive the cost of a tow truck.

Contents

  • 1 Nissan keyfob not working after battery replacement: 7 Reasons & Tips to solve this issue
    • one.1 #1: New battery result
    • 1.2 #2: Something incorrect with bombardment electrical contact points
    • one.3 #3: Problem with the remote key
    • 1.4 #4: The NATS system does not recognize the key fox
    • 1.v #5: Reset the car by disconnecting motorcar bombardment & reconnecting it
    • 1.half-dozen #6: Get invalid cardinal ID, or no Central detected messages
    • one.seven #vii: Your key fob has lost its memory
  • 2 FAQs
    • 2.1 1. How do yous kickoff a Nissan with a dead key play a joke on?
    • 2.2 2. How often are you guys finding these need to exist replaced?
    • two.3 iii. What size bombardment goes in a key flim-flam?
    • 2.four 4. How to change the battery on a Nissan key fob?

Nissan keyfob not working afterward battery replacement: 7 Reasons & Tips to solve this upshot

6 reasons cause Nissa key fob not working after battery change

#1: New bombardment consequence

A make new battery is no guarantee that your fundamental fob will work. If you've changed the key fob battery and it'due south not working, attempt these tips:

  • Battery Located Correctly: Make sure the battery is in the correct war round. Like all batteries, at that place is a positive (+) side and a negative (-) side, and you may have fitted it upside down.
  • The New Battery is Flat: If you have a multimeter, make certain the battery is giving at least 3 volts. Without a multimeter, try changing the battery for another one.

Where batteries are concerned, we recommend buying name-brand versions. The cheap batteries from the dollar shop are cheap for a reason!

Observe purchasing options for Name-make CR2025 Batteries online:

Duracell 2025 Battery for Mazda 3 Key Fob

Duracell CR2025 3V
Lithium Battery (2 Pack)

Energizer 2025 battery for Mazda 3 Key Fob

Energizer CR2025 3V
Lithium Bombardment (ii Pack)

#two: Something wrong with bombardment electric contact points

If you have checked your battery and know it is good, the next thing to cheque is the terminals. There are by and large two problems with the terminals:

  • Terminals are not making contact with the battery: The small "fingers" that make contact with the battery are fabricated from spring steel. Over fourth dimension, they tin can stop making good contact with the battery. You tin gently move them to be a tighter fit on the battery.
  • Dirty terminals: The steel terminals can become oxidized over time, causing a poor connection to the battery. Clean the terminals and fit a new battery.

#3: Problem with the remote key

If you lot have inverse the battery and checked the terminals and the central fob all the same doesn't piece of work, there may be an internal problem. Inside the primal fob is a modest circuit board to which the buttons connect. If they have go loose, it is possible to resolder them.

Another possibility is that the programming of the key play a joke on has go corrupted. Your Nissan dealership can reprogram the key fobs for a small price, which may cure all your issues.

#four: The NATS system does not recognize the central fob

The Nissan Anti-Theft System (NATS) sometimes does not recognize the key fob and prevents the car from starting. Luckily, there is a simple process to reinitialize the cardinal play a trick on and rectify the trouble:

  1. Make it your automobile with ane key fob, and the door closed.
  2. Bank check your dash. It should give the usual message "Press your brake and start button."
  3. Don't do anything. The dash will eventually go blank.
  4. Press the lock button on the primal fob. The dash should display "Press your brake and first push button."
  5. Printing and the lock push button, but this time concur it on.
  6. Now press the restriction and outset button as if you are going to start the automobile.
  7. The dash should now display "Cardinal ID incorrect."
  8. Release the brake and touch the key fob to the start engine button.
  9. The dash should now brandish "Press your restriction and start button."
  10. The NATS organisation should now recognize the primal flim-flam, and the fob should work correctly.
  11. Repeat the process for whatsoever other cardinal fobs that are not working.

#5: Reset the motorcar by disconnecting car battery & reconnecting it

If you supervene upon your Nissan fundamental pull a fast one on battery before the voltage gets too low, yous should not have any problems. Even so, the fob memory chip may get corrupted if the battery voltage gets also depression earlier y'all modify it.

This fault tin ordinarily be fixed through a simple process:

  • Put the key fox in the car.
  • Disconnect the bombardment.
  • Look for a few minutes.
  • Reconnect the battery. This causes a cold kicking of the electronic control unit (ECU), which then reprograms the key fob.

#vi: Get invalid key ID, or no Key detected messages

Follow the simple steps below to reset the key pull a fast one on and clear the error:

  1. Remove the door cardinal from inside the primal fob.
  2. Arrive the car and printing the start button twice. This cycles the automobile electronics from OFF to ACC to ON. Make certain you do non press the brake pedal.
  3. Get out of the car with the spare key.
  4. Use the central to lock the auto by turning it to the left in the door lock. You'll hear the doors lock.
  5. At present unlock the doors once again by turning the key to the right. You'll hear the doors unlock.
  6. Remove the cardinal and get into the car.
  7. Push the start button, only again exercise not touch the brake. This puts the auto electronics in OFF mode.
  8. Your key flim-flam should now work correctly.

#7: Your central pull a fast one on has lost its memory

When you alter your key play a joke on battery, you lot need to fit the new one quickly. If the battery is left out for effectually 30 seconds or more, the central fob can lose its retentiveness.

If this happens, you will demand to follow the process below to reprogram the fob.

vi Steps to Programming Your Nissan Key Fob :

  1. Get into the driver'southward seat of your Nissan.
  2. Lock the doors using the lock doors button on the control panel.
  3. Inside ten seconds, insert and remove the ignition central. If successful, the vehicle's interior and outside lights volition flash. If nothing happens, start once more, as the timing is essential hither.
  4. At present insert the ignition central and turn it to the first position to select the ACC style.
  5. Printing whatsoever key on the key fob in one case. Your adventure lights volition flash once, indicating that the cardinal trick is existence reprogrammed.
  6. Expect for around 10 seconds, then remove the ignition key, get out of the automobile and try to use the key fob. It should now work correctly, but if not, repeat the process.

FAQs

1. How exercise yous commencement a Nissan with a dead key fob?

The start challenge is to get into your car. To do this, simply remove the central hidden within the primal fob. Turn the cardinal fob over, and you will run into a modest tab that allows you lot to pull the primal out.

Now, open the car door using the key. Your alarm volition probably go off, merely you have to ignore it.

Concur your primal play tricks confronting the start/cease button, press the brake, and press the start button. Your alarm should reset, and the machine should start. Now get a new bombardment for your key fob as soon as possible!

Note: Newer Nissan cars do not have the cardinal hidden inside the central fob, and you volition not be able to use this method. An first-class incentive to replace your Nissan key fob batteries regularly.

Buy Replacement Batteries for your Nissan Cardinal Fob here:

Duracell 2025 Battery for Mazda 3 Key Fob

Duracell CR2025 3V
Lithium Battery (two Pack)

Energizer 2025 battery for Mazda 3 Key Fob

Energizer CR2025 3V
Lithium Bombardment (two Pack)

2. How oftentimes are y'all guys finding these need to be replaced?

The general recommendation is to supervene upon the key fob batteries every two years. The batteries are not expensive, and so it is coin well spent.

3. What size battery goes in a key play tricks?

The battery y'all require will depend on your model of car. Your user transmission should tell you lot which battery you need. If y'all don't have one, you lot can utilize the instructions below to take the back console off your key fob to check.

Your bombardment will be one of ii types:

  • CR2025
  • CR2032

If your fob uses the CR2025, it may be worth replacing it with the CR2032 side by side time yous change it. However, the CR2032 is around 0.7mm thicker than the CR2025, and then it may non fit. Cheque how much space you lot have.

The batteries are only a few dollars each and are bachelor from most drug stores.

4. How to change the battery on a Nissan key fob?

Changing a Nissan key fob battery is very easy:

  • Turn the fundamental pull a fast one on over, push the small tab, and remove the hidden primal first.
  • Use a slim screwdriver or similar to prise the ii plastic parts of the key fob autonomously.
  • Lift out the battery, noting which way round it fits – either positive or negative facing upwards.
  • Fit the new battery.
  • Push the two halves of the key flim-flam together until you hear a click.
  • Reinsert the hidden key.

Notation: We suggest working on your primal fob on a non-conductive surface, such as a wooden worktop. Any static generated on a metal plastic surface could harm your key fob.

This Youtube video on removing a Nissan primal trick battery volition show you lot all the steps.

duncanprilloomply.blogspot.com

Source: https://batteryglobe.com/nissan-key-fob-not-working-after-battery-change/

0 Response to "What to Do After Changing the Battery in My Nissan Smart Key Fob to Get It to Work Again"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel